2 Connecting Cameras

3.Enter the IP address for the camera and press [ENTER].

Use an address with the same DHCP address segment as used by the router, but make sure that address is not assigned in DHCP.

The address entered here will be assigned to the first camera configured using Quick Setup. Additional cameras will be assigned sequential addresses.

If you’re uncertain which addresses to use, ask the router’s manufacturer how to confirm router settings and address usage.

2.4.4Setting the User Name and Password

Note

If the cameras are set to their default settings, user names and passwords will be automatically assigned without a need for you to set the administrator name and password. Images from cameras for which the user names and passwords are not equal to the administrator name and password, however, will not be visible with a computer. To view camera images on a computer, Quick Setup must be performed after setting the administrator name and password for the camera.

User names and passwords are case sensitive.

1.On the [Basic Setup] screen, select [Camera Settings], and press [ENTER].

The [Camera Settings] screen will appear.

[For assistance, please call: 1-800-272-7033]

45

Page 45
Image 45
Panasonic BL-WV10A operating instructions Setting the User Name and Password