Panasonic BL-WV10A operating instructions Placing the Router and the Cameras, See

2Connecting Cameras

(see page 96).

Current date and time

2.4.7Placing the Router and the Cameras

Place cameras after confirming the camera image (see page 50) and the router after confirming it has been correctly registered and connected.

1.Place the router and the cameras.

•Refer to page 6 in this manual as well as the Operating Instructions included with the camera for proper placement.

2.Make sure the BL-WV10A is turned off.

3.Connect the LAN cables to the devices as necessary but do not turn them on.

4.Turn on router and all cameras connected to the router.

5.Set the mode switch on the back of the BL-WV10A to [NORMAL] and turn it on.

6.Turn on the cameras connected to the BL-WV10A.

7.Confirm that each camera can be accessed from the BL-WV10A.

•Camera information can be displayed by pressing [DISPLAY] while monitoring a camera. When placing a wireless camera, refer to the signal strength displayed on-screen for optimum transmission quality. Transmission problems can result in connection faults and problems when monitoring the camera.

Signal strength

Strongest signal Weakest signal No signal

52