Panasonic BL-WV10A Quick Setup, Ethernet cable, On the bottom of the camera to Wired

2Connecting Cameras

2.2.3Quick Setup

Once basic setup is complete, Quick Setup will automatically launch for network and wireless settings. Setup will be complete in approximately 2 minutes.

•Once registration is complete, [Finished] will be displayed, the buzzer will sound, and the wireless indicator will turn green.

Upon completion of Quick Setup for network and wireless settings, [Finished] will be displayed.

1.Connect a camera (using the Ethernet cable supplied with the camera) to any of the LAN jacks on the BL-WV10A.

2.Turn on the camera.

• Quick Setup will configure the camera and restart it if necessary.

Rear panel of LAN jacks	Rear panel
BL-WV10A	of camera

	Ethernet cable
Switch
	To configure a BL-C30A wireless camera
Bottom of BL-C30A	using the Quick Setup utility, set the switch
	on the bottom of the camera to [WIRED]

26