2 Connecting Cameras
[For assistance, please call: 1-800-272-7033] 51
Note
• As the cameras start up, those registered in camera list 1 will display a
monitoring image. If multiple cameras were registered, please confirm that
monitoring images for all of the cameras registered in the Multi-Camera
Screen (see page 64) are displayed.
• If the BL-WV10A does not receive date and time information from any of
the connected cameras, the [Date and Time] screen will appear. Select
the current date and time using the navigator keys on the remote control,
and press [ENTER] when finished.
• If a camera image does not appear, check the connection and then restart
the camera. If the image still fails to appear, reset the camera to its default
values, and re-register it using Quick Setup.
• The date and time is displayed in the upper-right corner of the BL-
WV10A’s menu. If the date and time setting is not correct, set the correct
date and time from the [Date and Time] screen on the [Settings] screen