4 Recording Images
[For assistance, please call: 1-800-272-7033] 83
Note
• HCM series cameras cannot record by sensor. Do not set sensor
recording for an HCM series camera.
• If the power fails or is turned off during a continuous sensor recording, you
may see an error result. If that occurs, erase the timer recording settings
(see page 84).
• During continuous sensor recording, when sensor activation is used to
record images, the sensor indicator will begin flashing once the camera’s
sensor is activated. To stop the flashing, see page69.
• The sensor range may differ depending on the camera type. See the
camera user guide for cautions in placing the camera to maximize that
range.
4.4.3 Changing the Record Mode
The image mode can be changed for timer and continuous sensor recording.
1. In the [Recorder] screen, select [Record Mode] and press [ENTER].
• The Record Mode screen appears.
2. Using the left and right navigator keys, select the desired mode and press
[ENTER].
Note
• A guide for the capacity of a 64MB SD memory card for each recording
mode is indicated below (for more information see page 74). If the
resolution is set to LOW, the recorded image will appear smaller, as will its
image during recording.