Toshiba 281c/351c/451c manual Automatic Paper Selection APS

1. Paper Selection

Automatic Paper Selection (APS)

When you place standard size originals on the original glass or the Reversing Automatic Document Feeder (optional), the size of the originals is automatically detected, which helps the equipment select paper that is the same size as the originals.

•The automatic paper selection may not work correctly depending on the type of the originals. In that

case, select the paper size manually.( P.86 “Manual paper selection”)

• For original sizes available for automatic paper selection, see P.56 “Acceptable originals”.

31 Place paper in the drawer(s).

2 Place the original(s).

3 Confirm that automatic paper selection has been selected on the basic menu.

•Automatic paper selection is selected by default at the installation of the equipment.

•If “Change direction of original” or “CHANGE DRAWER TO CORRECT PAPER SIZE” appears, perform the action accordingly.

•Set other copy modes as required.

Even if the direction of the paper set in the selected drawer differs from that of the original, the equipment rotates the data of the original by 90 degrees to make copies as long as their sizes are the same. (This works on A4 paper only.) For example, when an A4 original is set vertically and A4-R paper is placed in the drawer, the data of A4 original will be rotated and copied correctly on A4-R paper.

When automatic paper selection is not selected

(1) Press the Enlargement/Reduction ([ZOOM...]) button.

84 3.SETTING OF BASIC COPY MODES