Toshiba 281c/351c/451c manual Bypass copying on non-standard size paper

3.Bypass Copying (Cont.)

Bypass copying on non-standard size paper

Non-standard size paper should be within the following ranges: A (Length): 100 to 297 mm, B (Width): 148 to 432 mm

2
B	A

1 Place some sheets of paper with their copy side down on the bypass tray. Align the side guides to the paper length while holding A.

•The message “Ready for bypass feeding” appears.

•Rear side of the side guides of the bypass tray has an indicator for paper height. The height of the sheets must not exceed this indicator.

•When you use more than one sheet, fan the sheets well before setting them on the tray.

•Do not push the sheets into the entrance of the bypass feeder; it may cause a paper jam.

A

When the paper size is larger, draw out the three-stage paper holder. Raise B when you use A3 or a larger size of paper.

B

2 Place the original on the original glass.

76 2.HOW TO MAKE COPIES