Toshiba 281c/351c/451c manual JOB Build, 166

13. JOB BUILD

This function allows you to copy different kinds of originals at one time.

Scanning is performed by setting the optimal original mode and image adjustment for each original (it is called a job). After all the originals have finished being scanned, they can be copied at one time.

Also, the original scanning source (Reversing Automatic Document Feeder or original glass) of originals can be switched per job, and so, for example, after originals such as multiple A3 texts, news clips, photo- graphs in magazines and multiple A4 photographs with the appropriate settings have finished being scanned, they can be copied in the scanned order in one go. And the scanned data can be stored in e-Fil- ing.

5

•Up to 1000 pages of originals are possible.

•Any number of jobs can be set until the total number of scanned original pages reaches 1000.

There are restrictions on the settings for JOB BUILD: Settings not available for JOB BUILD, common set- tings which are set before scanning the first job and applied to all jobs, and changeable settings for each job. See the following table to perform the setting.

Settings not available	Common settings	Changeable settings
for JOB BUILD	for all jobs	per each job
Automatic Paper Selection (APS)	e-Filing/file	Reproduction ratio
Book to 2	Mixed-size original	Automatic magnification selection
Twin colour copy	Paper size to be copied	(Default setting for JOB BUILD)
Image editing	Sort mode	Original size
XY zoom	Image shift	Original mode
Cover copying	Book centre erase	Colour mode
Sheet insertion mode	Time stamp	1-sided -> 1-sided / 2-sided ->
Magazine sort	Page number	1-sided (or 1-sided -> 2-sided /
Magazine sort & Saddle stitch	Image direction in 2-sided	2-sided -> 2-sided) copying
2IN1 / 4IN1	copying	Background adjustment
	Book <-> tablet	Sharpness
		Edge erase
		Dual-page
		ADF / SADF

166 5.USING THE EDITING FUNCTIONS