Toshiba 281c/351c/451c manual Adjust the side guides with both hands

5 While pushing the green lever of the side

guide in the direction of the arrow, set the side guide to the desired paper size.

• Adjust the side guides with both hands.

6 Push the arrow part (left side) to lock the side guide.

1

7 Place paper in the drawer(s).

• Place paper with its copy side up. (The copy side may be described on the wrapping paper.)

• For the maximum number of sheets that can be set, see P.44 “Acceptable copy paper”.

•Fan the paper well before placing it in the drawer.

•Be sure that the paper height does not exceed the line indicated inside of the guide.

•Do not use creased, folded, wrinkled or damp sheets of paper.

Make sure that a gap of 0.5 mm (1.0 mm or less in total) is left between the paper and the side guide for plain paper, and approx.

0.5mm to 1.0 mm (approx. 1.0 mm to 2.0 mm in total) for thick paper. If the gap is insufficient, it could cause paper misfeeding.

A

47