Toshiba 281c/351c/451c manual Side guides to the paper length while, Holding a

3.Bypass Copying (Cont.)

Bypass copying on standard size paper

Copying on A3, A4, B4 and B5 size paper

1	Place some sheets of paper with their
2	copy side down on the bypass tray. Align
	the side guides to the paper length while

holding A.

•The message “Ready for bypass feeding” appears.

•Rear side of the side guides of the bypass tray has an indicator for paper height. The height of the sheets must not exceed this indicator.

•When you use more than one sheet, fan the sheets well before setting them on the tray.

•Do not push the sheets into the entrance of the bypass feeder; this may cause a paper jam.

A

When the paper size is larger, draw out the three-stage paper holder. Raise B when you use A3 or a larger size of paper.

B

2 Place the original(s).

3 Press the button of the same size as the one of the paper you have set on the tray.

• If the paper size is not specified here, some operations may slow down the copying.

72 2.HOW TO MAKE COPIES