Toshiba 281c/351c/451c manual Recalling dimensions registered in the memory

3.Bypass Copying (Cont.)

Recalling dimensions registered in the memory

Press the desired memory number button from [MEMORY 1] to [MEMORY 4] to recall the dimension data registered previously, and then press the [ENTER] button.

2

•Paper size that can be set is as follows: Length: 100 mm to 297 mm

Width: 148 mm to 432 mm

•	To register the dimension data in the memory, see	P.78 “Registering non-standard size in the memory”.
•	Set other copy modes as required.

5 Press the [START] button on the control panel.

Registering non-standard size in the memory

1 Follow steps 1 to 3 on “Bypass copying on non-standard size paper” ( P.76).

2 Press the memory number button (from [MEMORY 1] to [MEMORY 4]) you want to register the dimension.

78 2.HOW TO MAKE COPIES