Toshiba 281c/351c/451c manual 151, Place the original with its face up on the original glass

4 Place the original with its face up on the original glass.

•Set the original face up with its bottom toward you and fit its top left corner against the top left corner of the original glass, and align it with the original scales.

Do not place heavy objects (4 kg or more) on the original glass and do not press on it with force. Breaking the glass could injure you.

5 Specify the area. Using the original scale on the left and the inner (top) scale, read the following 4 values:

X1: Distance from the top left to the left edge of the specified area

X2: Distance from the top left to the right edge of the specified area

Y1: Distance from the top left to the upper edge of the specified area

Y2: Distance from the top left to the lower edge of the specified area

• The marks of the original scale have a 2 mm pitch.

5

6 Enter the values read in step 5 for the specified area, and then press the [SET] button. Set 4 values in order.

•After the setting of 4 values is finished, the next edit area menu is displayed. Repeat steps 5 and 6 when you specify other areas. Up to 4 areas can be specified on an original.

•To correct the value which has been set, press the [RESET] button. Pressing it once makes the highlighted field move one position upward. Highlight the field in which you want to rectify the value, and then key in the correct one.

7 Press the [ENTER] button after specifying the area.

151