Toshiba 281c/351c/451c manual 325, 12Close the front cover of the finisher

8 Install the staple cartridge.

9 Pull the handle of the stapler of the Sad- dle Stitch Unit toward you to unlock it. Then return the stapler to its original position.

2

1

10Insert the Saddle Stitch Unit into the fin- isher carefully.

10

11 Check the following 2 items before test stapling.

•Check if the finisher is securely installed on the equipment.

•Check if any of A3, A4-R or B4 paper is set in the drawer.

12Close the front cover of the finisher.

• Test stapling is automatically performed.

Test stapling will not be performed if the conditions mentioned in step 11 are not met. Be sure to check the items mentioned in step 11 and open the front cover of the finisher and then close it again before performing test sta- pling. Test stapling is necessary to prevent void stapling.

325