Toshiba 281c/351c/451c manual 301, Raise the Hole Punch Unit, and remove any misfed paper

Releasing a paper misfeed in the Finisher and the Hole Punch Unit (optional: MJ-1024/1023, MJ-6004)

1 Hold up the guide and remove any mis- fed paper in the paper exit area.

• When the Hole Punch Unit (optional: MJ-6004) is installed, pro- ceed to step 2. If not installed, proceed to step 6.

2 OpenUnit. the front cover of the Hole Punch

3	Turn the green knob to locate the triangle	9
	mark within the area indicated on the
	label.
	• Under this condition, the punchers are up.

4 Raise the Hole Punch Unit, and remove any misfed paper.

301