Toshiba 281c/351c/451c manual Enlargement and Reduction Copying

3.Enlargement and Reduction Copying (Cont.)

Specifying both original size and copy size separately

3

1 Place paper in the drawer(s).

2 Place the original(s).

3 Press the Enlargement/Reduction ([ZOOM...]) button.

4 Specify the original size and copy paper size.

Original size: Press the size button representing the same size as that of the set original.

Copy paper size: Press the size button representing the desired copy paper size.

E.g.: When A4 for the original size and A3 for the copy paper size are selected

•The copy paper size can also be set by pressing the drawer button on the touch panel.

•When the original size and copy paper size have been specified, the enlargement/reduction ratio is computed and displayed on the touch panel.

•Set other copy modes as required.

When the original or copy paper is a standard size other than A3, A4, B4 or B5, you need to register this paper size in the selections of the [OTHER] button in advance. See “When a standard size paper other than A3, A4, B4 and B5 is set” below for the registration.

5 Press the [START] button.

92 3.SETTING OF BASIC COPY MODES