Resetting Procedure | TMC EV4500 guide

Additional Information

Troubleshooting Guide (Continued)

Problem

Solution

Other problems.

Make sure that you have followed all of the instructions in this User’s Guide.

If you are still having difficulty, resetting the phone may help. It is recommended to perform the following resetting proce- dure at ALL telephones, even ones that seem to be fine.

Resetting Procedure:

1.Remove the battery from your telephone and leave it out (Please note that a battery is not necessary for normal operation).

2.Unplug the AC adapter from your telephone, then wait for 15 seconds.

3.Reconnect the AC adapter, then wait for 15 seconds.

4.Press P.

5.Press Htwice.

6.Dial 2503 on the dialpad and wait for 30 seconds.

7.At this point the display will read “Station #??” and the Line LEDs will be flashing.

8.Press D, then press P. This completes the resetting procedure.

If you continue to have problems, call TMC’s toll-free cus- tomer support line at 1-800-TMC-1638. If you cannot cor- rect the problem, disconnect the telephone and refer to the TMC limited warranty information on page 118.

115

Image 129

TMC EV4500 manual Resetting Procedure

Contents

User’s Guide Please read before using telephone Getting Started Important Safety Instructions Before you begin Packing List Important Notes for DSL users Getting Started This page intentionally left blank Music On Hold Adapter Other Optional AccessoriesExternal Paging Adapter Door Intercom/Door Opener Adapter Table of Contents Intercom Operation Memory Dialing 58-71 Answering System Centrex Operation Expanding the Epic System Index Additional Information Location of Controls Xii Installing Your System Identify Your Existing Wiring System If you are installing new wiring and jacks Label the jacks at each locationIf you have difficulty in identifying wall jacks Standard Installation Installing Your System Plan Your Installation Stn Installation Worksheet Installing Your System Install Desk/Table Top Phones Connect First Line CordConnect Second Line Cord Install Batteries Optional Connect Power CordVerify Proper Installation Connect Handset Connect Cords to Telephone Installing Your System Install Wall Mounted PhonesConnect Cords to Wall Reverse Handset Hook Attach Telephone to Wall Using Station Names Installing Your System Verifying Proper Installation Following must be done at each station Setting Up Your System Setting Up Your System At a Glance Following must be done at Station #11 To choose which line will be automatically selected Setting Up Your System Setting Automatic Line Selection To assign distinctive rings to one or more lines Setting Up Your System Setting Distinctive Ringing Turning toll restriction on/off at a particular telephone Setting Up Your System Setting Up Toll Restriction Worksheet To set the restricted numbers at a particular telephone To completely restrict specific lines at a telephone Choices are L1 Normal factory setting Enter To set the allowed numbers at a particular telephone Setting Up Your System Setting System Call Privacy On/Off Choices are Call PrivacyON factory setting Call PrivacyOFFTo set system call privacy on/off At Station #11 Choices are L2 Shared factory setting To programL2 L2 AUX1 Page Line indicators Operating Your System Indicator Light DescriptionIntercom Indicator LCD Station In-Use Indicators To choose how each line will ring Operating Your System Operating Your System Adjusting Volume Levels Choices are Dial Tone factory setting Dial Pulse Operating Your System Making a Tone/Pulse SelectionTo set your system to Tone or Pulse Dialing At Station #11 To make and answer calls using the handset To make and answer calls using the speakerphoneOperating Your System Making and Answering a Call Operating Your System Using Redial To redial the last phone num- ber you dialedTo redial any of the last five phone numbers you dialed Operating Your System Using Hold To put an outside call on holdPress Hold to place an outside Call on hold To switch between lines To make a call on another lineTo answer a call ringing on another line Operating Your System Conferencing Calls To conference two outside callsTo conference another station while on an outside call Press Transfer To send a call to Another station To use one of eight personal rings To use the transfer ring To view numbers in the caller list Operating Your System Using Caller IDTo see the caller ID informa- tion of an incoming call To use call waiting caller ID To dial a number in the caller list To delete numbers from the caller listEntering Area Codes into your Epic telephone To access your voice mail mes- sages Operating Your System Using Telephone Company Voice MailTo use your MSG lamp to indi- cate voice mail messages To turn off the MSG lamp Operating Your System Using Flash To turn mute on/off during a call Operating Your System Using Mute Operating Your System Operating Your System Using Line Reserve To cancel Line ReserveTo reserve a line that is cur- rently being used To release call privacy during a call Operating Your System Releasing Call Privacy Operating Your System Using Toll Restriction To restart the timer from zero Operating Your System Using the Call TimerTo view the elapsed time dur- ing your call To view the length of your pre- vious five calls Usethe HEADSETbutton totoggle the headset on and off To make and answer a call using the headsetPage Directory Card Memory Dialing Memory Features Memory Dialing Using Memory Dial To store a memory dial num- berTo dial a memory dial number Memory Dialing Using Personal Directory Dial To store a personal directory dial numberTo dial a personal directory number Memory Dialing Using Shared Directory Dial To store a shared directory dial number At Station #11To dial a shared directory number Storing a switchhook flash into memory Memory Dialing Special Memory FeaturesStoring a hyphen into memory Storing a dialing pause into memory Storing a Caller ID number into memory Storing one of the last five numbers dialed into memoryPredialing Erasing numbers stored in memory To intercom another station Intercom Operation Making Intercom Calls If your phone is set to Intercom Ring Intercom Operation Answering Intercom CallsIf your phone is set to Intercom Voice If your phone is set to Intercom Handsfree Intercom Operation Making Pages To page another stationTo make an All Intercom Operation Answering Pages To answer a page directed to your station or an AllBlocking Pages at your telephone To choose how your phone will respond to intercom calls To make an off hook voice announcement Intercom Operation Using Off Hook Voice AnnounceTo respond to an off hook voice announcement Blocking off hook voice announcements at your telephone Intercom Operation Monitoring a Room Using the Intercom Intercom Operation Naming Stations To Name a Station in Your Epic System At Station #11Guide for Entering Names Setting Up and Operating Your Telephone’s Answering System Answering SystemAnswering System Overview To turn your answering sys- tem on/off Turning your Answering System On/Off Recording your OGM To record your OGMFollow the instructions at left to record your OGM Reviewing your OGM Erasing your OGMChanging your OGM Listening to your Messages Message auto save Using dialpad Jump forwardSaving a message as new To change playback speed Changing Playback Speed To erase a message Erasing messagesTo erase all messages Use the Erase button to erase any or all of your messages To set your telephone’s pickup delay Setting your Telephone’s Pickup Delay To record a memo or conver- sation Recording a Memo or ConversationUse the xbutton to record a memo or your con- versation Recording a Memo To screen your calls Use the bbutton To set Toll Saver on/off Toll Saver feature can Back Enter Next To set New Message Beep On/Off Setting New Message Beep On/Off Auto Attendant Overview Setting Up and Operating a Telephone as an Auto Attendant Auto Attendant Sequence for Callers To set your telephone as an Auto Attendant Setting your Telephone as an Auto Attendant Recording your Auto Attendant Day, Night and Zero-Out OGMs To record your Auto Attendant Day, Night and Zero-Out OGMsChoices are AA Day OGM AA Night OGM To review an Auto Attendant OGM Reviewing, Erasing or Changing an Auto Attendant OGMReviewing an Auto Attendant OGM Erasing an Auto Attendant OGM Setting the Auto Attendant Pickup Delay To set the Auto Attendant Pickup DelaySet the AA Delay to 0 for a quiet office To set the Auto Attendant Day and Night Times Setting the Auto Attendant Day and Night Times To set more than one phone as an Auto Attendant Setting More than One Phone as an Auto Attendant Using Additional Auto Attendant OGMs Advanced Auto Attendant FeaturesTo record additional Auto Attendant OGMs Setting Separate Auto Attendant OGMs for Different Lines To set separate Auto Attendant OGMs for different linesYou may easily assign separate OGMs to different lines To turn off the Auto Attendant on one or more lines Turning the Auto Attendant Off on One or More Lines To choose the Zero-Out Action Choosing the Zero-Out Action Answering System Pressing # to Leave a Message at the Auto Attendant Repeating an Auto Attendant OGM To repeat an Auto Attendant OGMTo repeat the main menu To set the Night Message On/Off by Line Setting the Night Message On/Off by Line To transfer direct to voice mail Transferring Direct to Voice Mail Caller Dials Auto Attendant Response Summary of Auto Attendant Actions Use the Remote Code to Remote Operation To connect with the answering system Connecting with the Answering System Standard Configuration Expanding the Epic SystemPrivate Lines Auxiliary Lines Important Note To set up a private Centrex line at your telephone Centrex Operation Using Centrex With Your Epic TelephoneTo assign a distinctive ring to your Centrex line To store a Centrex code into a memory location To store the Centrex prefix Centrex Operation Storing the Centrex Prefix Choices are Centrex CSL OFF factory setting Centrex CSL on To set up a telephone as a Centrex console Choices are Ring Console no factory setting Ring Console YES To set up a telephone to ring a Centrex console Centrex Operation Using Centrex Auto Attendant Setting Centrex Transfer On/OffChoices are Centrex TrnfON To store the Dial prefix Centrex Operation Storing the Dial Prefix Using other Epic intercom telephones Using standard telephonesUsing fax machines and computer modems Data/fax jack is found on the right side of your Epic phone Additional Information External Feature Module set as an External Paging Adapter External Feature Module set as a Music On Hold Adapter To adjust the door intercom bell volume at your telephone To answer a door speaker over the intercomTo unlock a magnetic door lock Choices are Line ButSPEAKER factory setting Line ButHEADSET Choices are Station #NORMAL factory setting Station #LOCKED Additional Information Locking Station AssignmentsTo lock your telephone’s sta- tion assignment Operation During a Power Failure Additional Information Replacing Your Battery Additional Information Adjusting Held Call Reminder Additional Information Adjusting Auto Hold Drop Time Additional Information Adjusting Flash Length To erase all feature settings at a particular telephone Additional Information Erasing All Feature Settings To set your telephone’s loop voltage detector Additional Information Setting the Loop Voltage Detector Controlled by a wall switch Additional Information Troubleshooting Guide Problem may be caused by DSL microfilters. Note Problem Solution 114 Resetting Procedure Additional Information FCC Information Automatic Dialers What does your warranty cover? Additional Information Warranty InformationHow do you make a warranty claim? For how long after the original purchase? Limitations and Exclusions 32-33, 46-47 , 32-33 Index 121 122 TMC Corporation