
Memory Dialing
Special Memory Features (Continued)
Storing one of the last five numbers dialed into memory:
To store a redial number into memory, follow the instructions for entering a number into memory, except simply press REDIAL instead of manually dialing a number. You may then press the soft key under SCROLL to scroll through the last five numbers dialed. Press SAVE when the desired number is displayed.
Storing a Caller ID number into memory:
To store a caller ID number into memory, first scroll through the caller ID list. When the desired number is displayed, press the location where you wish to store the number. You may press a memory button, or the # button to store in your personal directory. Or, if you this phone is station #11 you may press the * button to store in the shared directory. The display will ask whether you wish to store the number. Press the soft key under YES to store the number.
Predialing:
You may predial a call, which allows you to casually enter a telephone number and check it in the display before it is dialed out. To make a predialed call, enter the number using the dialpad while the telephone is
Erasing numbers stored in memory:
To erase all memory dial numbers and personal directory numbers stored in your tele- phone, press PROGRAM, then press the soft key under NEXT repeatedly, until “Advanced Setting” appears in the display, and then press ENTER. “Erase Memory” will appear in the dis- play. Press ENTER. “Memory Dials” will appear in the display. Press the soft key under ERASE. After a brief pause, the display will read “Erasing Done!” To erase the shared directory num- bers, at station #11 follow the above steps until you see “Memory Dials” in the display. Press NEXT, and you will see “Shared Directory” in the display. Press the soft key under ERASE. After a brief pause, the display will read “Erasing Done!” To erase the toll restrictions stored in your telephone follow the above steps until you see “Erase Memory” in the display. Press NEXT repeatedly, until you see “Erase Toll Restr” in the display, and then press ENTER. If you are not at station #11, you will be prompted to enter the toll restriction access code. Do this, then press the soft key under ERASE. After a brief pause, the display will read “Erasing Done!”
49