Operating Your System

Using Toll Restriction

To temporarily turn off toll restriction at a restricted telephone:

1Press HOLD.

2Enter the 4 digit toll restriction access code which was set at Station #11. If no code was set, the access code is the initial number set at the factory, which is “1234”.

The SPEAKER light will flash indicat- ing that toll restriction is temporarily off, and you may make your call.

To turn toll restriction on/off at a particular telephone for a longer period:

Press HOLD then the four-digit access code to temporarily turn off Toll Restriction￿at a telephone￿

Use the * and # buttons if you wish to turn Toll Restriction￿￿￿￿ on or￿￿￿￿off at a telephone for a longer period

You may sometimes wish to make an unrestrict- ed call from a restricted telephone. When you use this feature, Toll Restriction will turn back on automatically 10 seconds after you hang up and will be signaled by a flash of the SPEAKER light. You may continue making unrestricted calls with- out the need of re-entering the access code, as long as you go off-hook again within 10 seconds of hanging up your previous call.

1Press HOLD.

2Enter* ... to*turn” orToll“#”.Restriction ON.

# ... to turn Toll Restriction OFF (fac- tory setting).

3Enter the 4 digit toll restriction access code which was set at Station #11. If no code was set, the access code is the initial number set at the factory, which is “1234”.

You may turn Toll Restriction ON and OFF at a telephone without affecting the Toll Restriction settings stored in that telephone. For instance, you may wish to turn Toll Restriction off for some guests, or you may want Toll Restriction to be on only during certain periods. When you turn off Toll Restriction at a telephone using this feature, it will stay off until you turn it back on.

Note: Turning Toll Restriction ON at a telephone will have no effect unless restrictions have been stored at that telephone. (See pages 14-17.)

40

Page 54
Image 54
TMC EV4500 manual Operating Your System Using Toll Restriction