Setting Up Your System
Setting Up Toll Restriction (Continued)
To completely restrict specific lines at a telephone:
1Press PROGRAM.
-The display will read “Program...”
2Press the soft key under NEXT repeatedly, until “Toll Restriction” appears in the display, and then press ENTER.
-The display will read “Enter Code:”
3Enter the 4 digit toll restriction access code which was set at Station #11 (See page 14).
-You will hear a confirmation beep and the display will read “Set Restricted #”
4Press the soft key under NEXT repeatedly, until “Line Restriction” appears in the display, and then press ENTER.
5Press the soft key under CHANGE repeatedly, until the desired Line 1 Restriction setting is displayed.
The choices are:
L1: NORMAL (factory setting)
L1: RESTRICTED
6Press the soft key under NEXT to
In addition to setting specific restrictions at a par- ticular phone (See preceding page), you may completely restrict any or all of the lines at a par- ticular station.
People will not be able to make any outgoing calls on any lines that are completely restricted at a station, with the exception of the allowed numbers at that station and calls to “911”. However, they will still be able to receive incom- ing calls on these lines, take calls off hold, and have full use of the intercom.
The ability to completely restrict lines is useful in an office where you only want people to make calls on certain lines at particular stations. You may also wish to put one station in a public area, such as a lobby, and completely restrict all or most of its lines.
see the current setting for Line 2, and repeat steps 5 and 6 to change the settings for Lines
7Press PROGRAM to exit.
16
