Memory Dialing
Using Memory Dial
To store a memory dial num- ber:
1Press PROGRAM.
-The display will read “Program...”
2Press the soft key under MEM.
-The display will read “Select Location”
3Press the Memory button where you wish to store the number, or press LOWER followed by the desired memory button if you wish to store the number in a lower memory loca- tion.
-The display will show the currently stored number, or indicate “Empty Location.”
4Press the soft key under CHANGE if you wish to store a new number.
5Dial desired telephone number, up to 32 digits.
6Press the soft key under SAVE.
Note: If you ever wish to erase the memory dial numbers stored in your phone, please follow the instructions found on page 49.
Press LOWER, | Press Memory |
then Memory button | button to dial |
to dial numbers in | numbers in white |
gray spaces | spaces |
You may store up to 6 telephone numbers at your telephone which you can dial automatically with the press of a memory button.
Note that you can enter hyphens in your num- bers for easy reading, as well as flashes and pauses (see page 48).
To dial a memory dial number:
1Press the memory button where the desired telephone number is stored.
OR
Press LOWER followed by the desired memory button if you wish to dial a number stored in a lower memory location.
When you press a memory button, the speaker- phone turns on automatically, and the number is dialed out. You may lift the handset or press HEADSET to switch to a handset or headset call
at any time. | 45 |
