REMOTE CONTROL
Panasonic video cassette recorders use the same remote control system so they may respond unintentionally to a command from this remote control. Change the code on this unit and its remote control (the two must match) if you place another Panasonic video cassette recorder close together.
≥Use “1”, the factory preset, under normal circumstances.
1 While OPTION menu is displayed
Press [3 4] to select the “REMOTE CONTROL”.2 Press [2 1] to select the code (1 or 2) and press [MENU].The remote control code on the unit has been set.
3 While pressing [ENTER] on the remote control, press and hold the numbered button ([1] or [2]) corresponding to the code you selected in step 2.
When the remote control code on the remote is set, “REMOTE” indication (l below) disappears.
The following is displayed for a few seconds on the main unit when you use a remote control with the different code.
The unit’s remote control code
Change its code to match the unit’s (l step 3).
| [Remember] Press [VHS] first. |
SHIFT r AUDIO | Changing audio |
CANCEL |
|
When a stereo and/or SAP broadcast is received, “STEREO” and/or “SAP” appear showing the type of broadcast.
To change the audio
Press [SHIFT]i[AUDIO].The audio changes as follows: ≥When playing a tape:
LR>L>R>Monaural audio track
≥While watching the television:
LR>L>R
The table below shows the TV broadcast type, “MTS” settings, and audio recording patterns.
TV | MTS | Audio track |
|
| |
broadcast | setting |
|
|
| |
Normal |
| ||||
|
|
| |||
|
| (Mono) |
|
| |
|
| Left | Right | ||
|
|
| |||
|
|
|
|
| |
Mono | MAIN or | Mono | Mono | Mono | |
| SAP |
|
|
| |
|
|
|
|
| |
Stereo | MAIN or | LiR | Left | Right | |
| SAP | (Mixed) |
|
| |
|
|
|
|
| |
Mono and | MAIN | Mono | Mono | Mono | |
SAP |
|
|
|
| |
SAP | Mono | Mono | SAP | ||
| |||||
|
|
|
|
| |
Stereo and | MAIN | LiR | Left | Right | |
SAP |
| (Mixed) |
|
| |
|
|
|
|
| |
| SAP | LiR | LiR | SAP | |
|
| (Mixed) | (Mixed) |
| |
|
|
|
|
|
Be sure that “MTS” is set to “MAIN” or “SAP” to record on the
[Note]
≥Switch to “MONO” for viewing or recording if a stereo or SAP broadcast is impaired by poor reception.
≥To resume stereophonic recording, set “MTS” to “MAIN” or “SAP”.
Auto bilingual choice function
When you play back recordings of stereo or SAP broadcasts, these audio types are automatically selected. The unit may select a different type if you start play midway through the program. Press [SHIFT]i[AUDIO] to change the type if this occurs.
This function does not work if:
–The tape was recorded on a deck without this system.
–The tape is a recording from external equipment.
RQT7921
39