Simple setup

STEP1 Front speaker assembly

The supplied stands are specially designed for attachment to Panasonic SB-FS730 front speakers. Use only as indicated in this setup.

Preparation

≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it. ≥For assembly, use a Phillips-head screwdriver.

≥Make sure you have all the indicated components before starting assembly, setup, and connection. ≥There is no difference between the right and left speakers and pipes.

2kFront

4kPipes

 

2kBases

4kWasher

4kBracket

2kSmall 2kBrackets

8kRubber

speakers

2kPipe A

2kPipe B

 

screws

screws

screws

pads

 

(with a cable)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Attach pipes B to the bases.

AInsert pipe B.

Match these holes when

you insert the pipe.

Pipe B

Base

BSecure pipe B to the base.

Ensure the screws are securely fastened.

3 Attach pipes A to the speakers.

Slot the screw head in between the 2 stoppers of the speaker groove.

Align the screw head with the speaker groove.

Ensure the pipe is fastened on straight by gradually tightening the right and left screws alternately until fully tightened.

To prevent short-circuit, do not cover the connection terminals with the pipe.

2 Assemble the pipes.

A Thread the speaker cable from Pipe A through Pipe B

4 Connect the speaker cables.

and the base.

For quicker threading, loosely fold the cable in half (do not crease), pass the folded portion through the pipe, and then pull the rest of the cable through the base.

BJoin Pipe A to Pipe B.

5 Secure the speaker cable to the base.

CSecure the pipes.

Ensure the screw is securely fastened.

[Note]

You can use the front speakers without assembling with the stands. In this case, attach the included rubber pads to the base of the speakers. This prevents vibration from causing the speakers to move or fall over. Use 4 pads per speaker.

RQT7921

5