Panasonic SC-HT880 Changing the delay time Speaker Settings, “Audio” tab, “Display” tab, TV Type

TV Type		≥Standard (Direct View TV) ≥CRT Projector					≥LCD TV/Projector
Select to suit the type of television.		≥Projection TV			≥Plasma TV
Time Delay		≥0ms		≥20ms	≥40ms		≥60ms	≥80ms	≥100ms
When connected with a Plasma
display, adjust if you notice the audio
is out of sync with the video.
Video Out (AV/Component)§5		≥Video/YPbPr			≥S-Video/YPbPr
Choose the video signal format to be		≥RGB/No Output
output from the SCART (AV) and
Component terminal.
Still Mode		≥Automatic
Specify the type of picture shown		≥Field: The picture is not blurred, but picture quality is lower.
when paused.		≥Frame: Overall quality is high, but the picture may appear blurred.
NTSC Disc Output		≥PAL60: When connected to a PAL television.
Choose PAL 60 or NTSC output when		≥NTSC: When connected to an NTSC television.
playing NTSC discs (➜ page 11,		([Southeast\Asia\and[Thailand[: “NTSC” is the factory preset.)
Video systems)
§5 [The[United[Kingdom]
∫ “Audio” tab
Dynamic Range Compression		≥Off
		≥On: Adjusts for clarity even when the volume is low by compressing the range of the lowest sound
		level and the highest sound level. Convenient for late night viewing. (Only works with Dolby
		Digital)
Speaker Settings (➜ below)		≥Center:		0.0/1.0/2.0/3.0/4.0/5.0 ms
Set the delay time for your center and		≥Surround (L/R): 0.0/5.0/10.0/15.0 ms
surround speakers.
∫ “Display” tab
Menu Language		§6 ≥English	≥Français		≥Deutsch	≥Italiano	≥Español	≥Polski ≥Svenska	≥Nederlands
		§7 ≥English	≥
		§8 ≥English	≥		≥Deutsch	≥Italiano	≥Español	≥Português ≥PyccknØ ≥Nederlands
				Français
On-Screen Messages		≥On		≥Off
§6 [The[United[Kingdom]	§7 [Southeast\Asia\and\Thailand[				§8 \The\Middle\East,\South\Africa,]Saudi\Arabia,\Kuwait,\Australia\and\N.Z.[
∫ “Others” tab
FL Dimmer		≥Bright		≥Dim
Changes the brightness of the unit’s		≥Auto: The display is dimmed, but brightens when you perform some operations.
display.
QUICK SETUP		≥Yes		≥No
Re-initialise Setting		≥Yes: The password screen is shown if “Ratings” (➜ page 20) is set. Please enter the same password.
This returns all values in the Setup		After “INIT” on the display disappears, turn the unit off and on again.
menus to the default settings.		≥No

Changing the player settings

Changing the delay time (Speaker Settings)

(Effective when playing multi-channel audio)

(Center and surround speakers only)

For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center or surround speakers closer to the seating position, adjust the delay time to make up for the difference.

C : Actual speakers position

L	C	R	: Ideal speakers position
	a
		c	a b c : Primary listening distance
		SW
		b
	LS	RS	Approximate room dimensions
	LS	RS

Circle of constant primary listening distance

If either distance a or b is less than c, find the difference in the table and change to the recommended setting.

a Center speaker		b Surround speaker
Difference (Approx.)	Setting	Difference (Approx.)	Setting
30 cm	1.0 ms	150 cm	5.0 ms
60 cm	2.0 ms	300 cm	10.0 ms
90 cm	3.0 ms	450 cm	15.0 ms
120 cm	4.0 ms
150 cm	5.0 ms

1Press [3, 4] to select the delay time box and press [ENTER].

2Press [3, 4] to adjust the delay time and press [ENTER].

Center delay time

	L	ms	C	R
		0.0
Exit	Exit			SW
	LS		ms	RS
			0.0

Surround delay time

To finish the speaker setting

Press [2] to select “Exit” and press [ENTER].

RQT7978

21