Simple setup
STEP1 Speaker assembly
[HT840] Front speakers
[HT880] Front and surround speakers
The supplied stands are specially designed for attachment to Panasonic
Speaker assembly
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it. ≥For assembly, use a
≥Make sure you have all the indicated components before starting assembly, setup, and connection. ≥There is no difference between the right and left speakers and pipes.
[Note]
≥To prevent the speaker cables from being pulled out of the pipes, leave the plastic wrap on the pipes while assembling the speaker stands.
≥[HT880] [The\United\Kingdom,\Australia[and\N.Z.\
The front and surround speaker pairs as well as the pipe pairs are different.
[HT840]
2 Front speakers | 2 Pipes | 2 Bases | 4 Long screws | 4 Short screws |
|
|
|
|
|
[HT880]
[The\United\Kingdom,\Australia[and\N.Z.\ | Pipes |
|
|
| |
2 Front and 2 Surround speakers | ≥2kpipes with short cable: |
|
|
| |
[Others] | For front speakers |
|
|
| |
≥2kpipes with long cable: | 4 Bases | 8 Long screws | 8 Short screws | ||
4 Front/Surround speakers | |||||
For surround speakers |
|
|
| ||
|
|
|
| ||
|
|
|
|
|
1 Assemble the speaker stands.
1Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do not crease), pass the folded portion through the hole, and then pull the rest of the cable through the base.
Cable
Plastic wrap
Base
Leave the excess speaker cable for connecting later.
2Insert the pipe.
Match these holes when you insert the pipe.
Insert the pipe while gently pulling on the speaker cable.
3Secure the pipe to the base.
Ensure the screws are securely fastened.
Pipe
Pipe support
Base
RQT7978
4
Short screws
(not included)
Before proceeding to the next step, please remove the plastic wrap from the pipe.
