Using the TV’s features (General)
•If TV is already turned on when Alarm is activated, the TV will simply switch to the specific TV mode or channel at the Alarm start time.
•If TV is already running the Programme Timer when Alarm is set to activate on DTV mode, on Alarm activation the Alarm will only turn on the TV (if it was in standby) but not switch to the channel specified in the Alarm setting.
•If TV is already running the Programme Timer when Alarm is set to activate on a TV mode other than DTV, the Alarm will perform normally.
•If you do not press any button on the side panel of the TV or the remote control within 2 hours after Alarm is activated, the TV will enter standby automatically.
Setting the sleep timer
The Sleep timer is especially useful if you want the TV to turn itself off after a selected period of time.
1Press M, then press or to display the TIMER menu.
TIMER
Sleep timer | 00:00 |
|
MENU Back EXIT Watch TV
2Press or to select Sleep timer.
3Press Number buttons
period. The timer display will set in blocks of 10 minutes to 12 hours and 50 minutes. If you press and hold or to set the time period, timer display will set in blocks of 30 minutes up to 12 hours 30 minutes.
4Press P to start the timer.
Selecting the video input source to view
1Press o on the remote control to display the video input mode list, then press or to select appropriate input source (or press o on the TV side panel or o on the
remote control repeatedly to select required input source directly). In Analog TV, you may also press Q to display the video input mode list.
DTV
1
2
3
HDMI1
HDMI2
HDMI3
PC
ATV
Ex. PC VGA mode
PC VGA
2Press Q.
DTV (Digital TV)
o 1 (o (1), video 1 input),
o 2 (o (2), video 2 input) or o 2S
HDMI1, HDMI2, HDMI3 (HDMI input), PC (o RGB/PC, PC input)
ATV (Analog TV)
Notes:
•When the component video input, PC input mode or HDMI input mode is selected, the AV OUTPUT terminals (- page 33) output audio signal only.
•If a
•When the TV is switched on, it will take a few minutes for the
•If the HDMI cable from connected device is changed or HDMI device setting are changed, Enable
Setting the manual setting menu - analog only -
1Press M, then press or to display the SET UP menu.
| SET UP | ||
|
|
|
|
Language |
| English |
|
Manual setting |
| OK | |
|
|
|
|
AV connection |
| OK | |
Picture position |
| OK | |
|
|
|
|
MENU Back | EXIT Watch TV | ||
2Press or to select Manual setting, then press Q.
3Press or to select an item, then press or to select the item as shown below.
Manual setting
Colour system:Auto
EXT1 A
OK Store
MENU Back | EXIT Watch TV |
AB
A.Colour System
Confirm that colour system is set to “A” (Auto). If not, select “A” with or .
B.Video label
The video label allows you to label each input source for your TV.
To change or create video labels:
1)Press or repeatedly to select a character for the first space, then press .
*(blank space)
2)Repeat step 1) to enter the rest of the characters. If you would like a blank space in the label name, you must choose a blank space from the list of characters.
3)Press Q to store your settings.
25
