Setting the HDMI1 audio mode, Selecting the AV output mode

Connecting your TV

Selecting the PC/HDMI1 audio mode

You can select PC audio or HDMI1 audio when using this function (- page 35).

1Press M, then press or to display the SET UP menu.

2Press or to select AV connection, then press Q to display the AV connection menu.

AV connection

PC/HDMI1 audio		PC

HDMI1 audio		Digital

HDMI setting		OK

AV output		ATV

MENU Back EXIT Watch TV

3Press or to select PC/HDMI1 audio, then press or to select PC or HDMI1.

Setting the HDMI1 audio mode

You can select sound of an HDMI or DVI device connected to the HDMI1 input terminals (- page 35) from three modes: Auto, Digital or Analog.

Note:

This function is available only when the PC/HDMI1 audio mode is set to HDMI1.

1From the AV connection menu, press or to select

HDMI1 audio.

AV connection

PC/HDMI1 audio		HDMI1

HDMI1 audio		Auto

HDMI setting		OK

AV output		ATV

MENU Back EXIT Watch TV

2Press or to select Auto, Digital or Analog.

Selecting the HDMI setting

The HDMI setting menu consists of the following 3 items: Deep Colour, x.v.Colour and Lip Sync. Some early HDMI equipment may not work properly with your HDMI TV. If you experience trouble, unplug your HDMI cable first and then try setting these three options to Off. This should allow your early HDMI source to operate properly with your TV.

1From the AV connection menu, press or to select HDMI setting, then press Q.

	HDMI setting

Deep Colour		On

x.v.Colour		On

Lip Sync		On

MENU Back	EXIT Watch TV

2Press or to select each item, then press or to select the desired setting.

Deep Colour mode

This function increases the available colours from the HDMI source to increase the boundaries defined by the RGB or YCbCr colour space.

x.v.Colour

This function expands the acceptable colour range (limits) of HDMI signals, then allows sending the wider colour signals from HDMI sources.

Lip Sync mode

This option activates an auto audio/video display timing adjustment function that allows HDMI source devices to accurately perform synchronization automatically.

All above HDMI settings require a proper HDMI source device.

If HDMI source products do not support these functions, the TV may not work properly by activating these functions.

Notes:

•In a non-HDMI signal mode, this function is not available.

•If your HDMI connection is capable of 1080p and/or your TV is capable of refresh rates greater than 60Hz or supports Deep Colour, you will need a Category2 cable. Conventional HDMI/DVI cables may not work properly with this mode.

Selecting the AV output mode

You can select the AV output from three modes; ATV, DTV or

Monitor.

1From AV Connection menu, press or to select AV Output.

2Press or to select the desired output mode.

ATV: Selected programmed channel from Analog TV system is output from the AV OUTPUT terminal.

DTV: Selected programmed channel from Digital TV system is output from the AV OUTPUT terminal.

Monitor: The AV output depends on the selected video input mode.

(e.g. If o1 is selected (- page 25), the AV signal input to o1 is output from the AV OUTPUT terminal.