Using the TV’s features (General)
1Press M, then press or to display the SOUND menu.
SOUND | 1/2 | |
MTS | Auto |
|
|
|
|
Dual | Dual 1 |
|
|
|
|
Bass | 0 |
|
|
|
|
Treble | 0 |
|
|
|
|
|
|
|
Balance | 0 |
|
WOW | OK | |
MENU Back EXIT Watch TV
2Press or to select MTS, then press or to select
Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/ bilingual programme, set the MTS mode to Mono. Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular programme on whose channel reception is usually good, try setting MTS mode to Auto, then switch S to e Mono (monaural) (- page 22).
Selecting the dual 1 or dual 2 mode
- analog only -
You can hear only dual 1 or dual 2 sound selected, whenever bilingual programmes are received.
1Press M, then press or to display the SOUND menu.
2Press or to select Dual, then press or to select
Dual 1 or Dual 2.
Notes:
•When the MTS setting is in Mono mode, the Dual menu is not selectable.
•The Dual menu setting status remains even if the TV is turned off.
Selecting the stereo programmes - analog only -
1When a stereo programme is received, d Stereo appears.
2Press S to select the stereo/monaural mode. d Stereo and e Mono appear cyclically on the screen.
Stereo
Selecting the bilingual programmes
- analog only -
1When a bilingual programme is received, j Dual appears.
2Press S to select the sound to be heard. The sound differs according to the transmission system: NICAM or German stereo/bilingual broadcast.
|
| Sound to be heard | |
Display | NICAM |
| German stereo/ |
|
| bilingual broadcast | |
|
|
| |
j Dual 1 | Sub I sound |
| Main sound |
|
|
|
|
J Dual 2 | Sub II sound |
| Sub sound |
|
|
|
|
e Mono | Main sound |
| — |
|
|
|
|
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
1From the SOUND menu, press or to select an item you want to adjust.
2Press or to adjust the settings as required.
| Bass | 0 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selection | Pressing | ||
|
|
|
|
Bass | weaker |
| stronger |
|
|
|
|
Treble | weaker |
| stronger |
|
|
| |
Balance | decreases the right | decreases the left | |
| channel |
| channel |
|
|
|
|
Using the SRS WOW® surround sound
SRS WOW® is a special combination of SRS Labs audio technologies that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer and wider.
WOW® consists of three features; SRS 3D®, SRS FOCUS®, and SRS TruBass®, being turned on.
1From the SOUND menu, press or to select WOW, then press Q.
2Press or to select an item you want to adjust, then press or to adjust the settings as required.
| WOW | |
|
|
|
SRS 3D |
| Off |
|
|
|
FOCUS |
| On |
|
|
|
TruBass |
| High |
|
|
|
MENU Back | EXIT Watch TV | |
SRS 3D: To turn the surround effect On or Off.
FOCUS: To turn the vocal emphasis effect On or Off.
TruBass: To select the desired bass expansion level (Off, Low or High).
Notes:
•If the broadcast is monaural, the SRS 3D® effect does not work.
•WOW, SRS and l symbol are trademarks of SRS Labs, Inc.
•WOW technology is incorporated under license from SRS Labs, Inc.
•The SRS WOW® effect is active only when the sound outputs from the speaker.
Dual 1
22
