Toshiba 37XV500A Teletext in Analog TV, To control the REGZA-LINK device, Using Auto mode

Using the TV’s features (General)

Notes:

•This function depend on the devices connected.

•When the TV is switched on, it will take a few minutes for the REGZA-LINKicon to appear in the list; when an HDMI cable is removed, it will take a few minutes for the icon to disappear.

•If the HDMI cable from connected device is changed or HDMI cable from connected device setting are changed, Enable REGZA-LINKin the REGZA-LINKmenu may need to be reset On.

To control the REGZA-LINK device

First select the HDMI input source with the desired REGZA- LINK device connected, then switch the mode on the remote control to REGZA-LINKand press the available button on the remote control (- page 11).

The TV features that can be controlled by the connected device remote control are:

Power standby, Volume, Program channel, Sound mute, Input selection, Number buttons, Previous programme channel.

Note:

These functions are dependent on the connected device. Not all the remote control buttons may be available. Please refer to the owner’s manual for all the connected devices.

Teletext in Analog TV

This TV has a multi-page teletext memory, which takes a few moments to load and it offers two ways of viewing Teletext Auto and LIST which are explained below.

Setting up the teletext mode

To select a language for teletext:

The language 1-4 option enables the display of different language when using Teletext.

1Press M, then press ￿ or ￿ to display the FUNCTION menu.

FUNCTION

Teletext	Auto
Teletext language	1
Auto format	On
4:3 stretch	Off
Blue screen	On
Side panel	1
MENU Back EXIT Watch TV

2Press ￿ or ￿ to select Teletext language, then press

￿or ￿ to select the required language.

•Language 1: English, German, Dutch, Flemish, Russian, Byelorussian, Bulgarian, Ukranian, Lettish, Lithuanian, Czech, Slovak, Estonian

•Language 2: Polish, German, Dutch, Flemish, Estonian, Lettish, Lithuanian, French, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian

•Language 3: English, French, Hebrew, Turkish, Arabic

•Language 4: English, French, Hebrew, Turkish, Farsi (Iranian/Persian)

To select teletext mode:

Select a channel position with the desired teletext service.

1From the FUNCTION menu, press ￿ or ￿ to select

Teletext.

2Press ￿ or ￿ to select Auto or LIST mode.

Note:

When you are watching the teletext programme, SET UP menu and FUNCTION menu are not selectable.

Teletext general information

button:

Pressing once will bring up the teletext screen. Press again to superimpose the teletext over a normal broadcast picture. Press again to return to normal TV mode. You need to return to normal viewing if you wish to change channels.

When you first press to access the text service, the first page you see will be the initial page.

In Auto mode, this displays the main subjects available and their relevant page numbers.

In LIST mode, you will see the page numbers currently stored on the each colour button.

Sub-pages:

Once in this chosen page, if there are sub-pages they will automatically load into memory without changing the one you are reading. If there are many sub-pages, it will take a long time for them all to load and this will depend on the speed with which the broadcaster transmits them.

To access the sub-pages in memory, press l, then use PU / P u to view them.

Note:

If you press r while the picture mode is activated, this mode will be cancelled.

Using Auto mode

There are two Modes: Auto will display FASTEXT or TOPTEXT, if available. LIST will display your four favorite pages. In either mode, as an alternative to the coloured buttons, you can access a page by entering a 3-digit number, using the Number buttons on the remote control, or to advance to the next page, press P U , to go back to the previous page press

Pu.

To change between Auto and LIST, see above.

• Press to access teletext.

Ex. FASTEXT

100 Sport 14:57:55

Football Baseball Racing Swimming

Red Green Yellow Blue

27