Panasonic SC-HT995W To adjust speaker level during play, H.Bass, Press -H.BASS

HT995&EnhancingHT995W.bookPagethe bass35Thursday,Aprilsound: 27,20068:17PM

H.BASS

You can enhance low-frequency sound so that heavy bass sound can be heard clearly, even if the acoustics of your room a e not optimal. The unit automatically selects the most suitable setting according to the type of playback source.

Press [-H.BASS].

	ST	SRD E.
≥[DVD-V] [DVD-VR]		HDCD
		H.BASS
H.BASS ON (factory preset),------.H.BASS OFF		W PGM
		1
≥When another source is selected
H.BASS OFF (factory preset),------.H.BASS ON

The setting you make is retained, and recalled every time you play from the same type of source.

Enhancing the surround sound effect: Surround Enhancer

Automatically adjusts each speaker to enhance the surround sound effect of multi-channel audio. When playing two-channel audio, the audio of the L/R front speakers is also output through the rest of the speakers creating a surround sound effect.

Press and hold [—SRD ENH].

ST	SRD E.
Each time you press and hold the button:	HDCD
	1
SRD ENH ON,------.SRD ENH OFF
	W PGM

Adjusting the volume of each speaker: Speaker level adjustments

This is one of the ways to get appropriate surround effects.

Preparation

Press [DVD].

1	While stopped and no on-screen display is shown
	Press and hold [—TEST] to output a test signal.
	≥To stop the test signal, press and hold [—TEST] again.
	L: Front left	C: Center	R: Front right
	RS: Right surround	LS: Left surround
	≥There is no output from SW (subwoofer) channel.
2	Press [VOLUME, r] or [s] to set the volume level
	normally used for listening.
3	Press [3] (increase) or [4] (decrease) to adjust the
	speaker level for each speaker.

≥Adjust the speaker levels to the same level as the front speakers. C, RS, LS: `6 dB to i6 dB

∫To adjust speaker level during play

[Effective when playing multi-channel audio or when Dolby Pro Logic II or Sound Field Control (MOVIE, SPORT or MUSIC) is on.]

1 Press [CH SELECT] to select the speaker.		effects
L #C #R #RS #LS #SW
^-----------------------------------------------------	}
SW: Subwoofer		sound
≥You can adjust SW only if the disc includes a subwoofer
channel.
≥“SW” does not appear on the display and is not adjustable		Using
when “ÎPLII” is lit.

≥“S” appears on the display when “MOVIE”, “SPORT” or “MUSIC” is selected with Sound Field Control (➜ page 34).

In this case, you can adjust both surround speaker levels at the same time using [3, 4].

S: `6 dB to i6 dB

2Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.

C, RS, LS, SW: `6 dB to i6 dB

(L, R: Only the balance is adjustable.)

≥To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 1].

RQT8766

35