Panasonic SC-HT995W Preventing the speakers from falling, Simple Setup

Models: SC-HT995 SC-HT995W

1 48
Download 48 pages 11.78 Kb
Page 7
Image 7
[HT995W]

[HT995W]

[Note]

The front and surround speakers are different.

Check the label on the rear of speaker before attaching the stand (page 9).

The stand with shorter cable is for the front speaker.

2 Front speakers and

4 Stands

4 Bases

16 Screws

2 Surround speakers

2kstands with short cable:

 

 

(with cover plate)

For front speakers

 

 

 

2kstands with long cable:

 

 

 

For surround speakers

 

 

Simple Setup

1 Attach the stand to the base.

1Thread the speaker cable through the base.

For quicker threading, loosely fold the cable in half (do not crease), pass the folded portion through the hole, and then pull the rest of the cable through the base.

Cable

Base

2Attach the stand to the base while gently pulling on the end of the speaker cable.

Stand

3 Attach the speaker to the stand.

1 Pull out the end of

Ridges

the speaker cable

 

and position it

 

between the ridges.

Cable

 

Stand

2Attach the speaker to the stand.

 

Cover plate

Speaker

Remove before attaching

 

the speaker and keep for

 

wall-mount use (page 8).

Stand

4 Secure the speaker to the stand.

Assembling the front and surround speakers

Base

Cable

Pull gently.

2 Secure the stand to the base.

Screw

Speaker

Stand

Screw

Tighten securely.

Ensure the speaker cable is centered in the groove.

Tighten securely.

Stand

Base 1 Attach the stand to the base.

Slide the speaker cable into the groove.

Screws

Tighten securely.

5 Connect the speaker cable.

Insert the wire fully.

_: White

`: Blue

Push!

3 Attach the speaker to the stand. Press the speaker cable into the groove.

Preventing the speakers from falling

e.g. [HT995]

You will need to obtain the appropriate screw eyes to match the

 

walls or pillars to which they are going to be fastened.

 

Consult a qualified housing contractor concerning the

 

appropriate procedure when attaching to a concrete wall or a

 

surface that may not have strong enough support. Improper

 

attachment may result in damage to the wall or speakers.

 

String (not included)

Thread from the wall to the speaker and tie tightly.

Screw eye

(not included)

Approx. 150 mm

RQT8766

Rear of the speaker

Wall

7

Page 7
Image 7
Panasonic SC-HT995 Preventing the speakers from falling, HT995W, Simple Setup, Assembling the front and surround speakers