1 Use the measurements indicated below to identify the screwing positions on the wall.
≥Position the unit with at least 50 mm of space above the unit. If not, it may not be possible to access the buttons on this unit.
|
| 1018 mm |
|
|
257 mm | 252 mm | 233.5 mm | 275.5 mm |
|
|
|
| 31.5 mm | 75 mm |
|
|
| 43.5 mm | |
|
|
|
| |
| | 12.5 mm | |
|
AWall mount bracket
2 Attach the wall mount brackets to the wall.≥The position in the wall where the screw is to be attached as well as the screw should be capable of supporting over 33 kg.
≥Be sure to use a spirit level to ensure that both screwing positions are horizontal to each other.
≥Keep the screws out of reach of children to prevent swallowing.
≥Keep the wall mount brackets out of reach of children to prevent swallowing.
BWall mount bracket (supplied) C Screws (not supplied)
|
| A | At least 30 mm |
| B | ‰4.0 mm | |
| C | ‰7.5 mm to | |
|
| ‰9.4 mm | |
| D | Wall | |
| E Wall mount | ||
|
|
| bracket |
≥Connect the AC mains lead cord to this unit, but do not connect it to the household mains socket until the installation is completed.
4 Attach the rear pads to the rear of the unit.≥Keep the rear pads out of reach of children to prevent swallowing.
| |
DRear pads (supplied)
5 Attach a cord (not supplied) to 2 safety holders.≥Use a cord which is capable of supporting over 33 kg.
≥Keep the safety holders out of reach of children to prevent swallowing.
| | E Safety holder (supplied) | |
F Cord (not supplied) | |||
|
| ||
|
| G Thread a cord through the holes. |
| Refer to the Operating |
| Instructions of the cord for |
| details. |
12