Step 1 Placement

Caution

This unit and the active subwoofer are to be used only as indicated in these instructions. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

Do not attempt to attach this unit to a wall using methods other than those described in this manual.

This unit

E.g.,

On the wall

In a rack or on a table

Page 11

 

Page 14

Refer to “When placing the unit on a

 

Refer to “When placing the unit in a rack or on a table”

wall”

 

 

 

 

 

When placing the unit in front of the TV.

This unit may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic Tracking System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D compatible TV. Depending on how this unit is placed, this unit might block the TV’s remote control signal sensor.

If the stands are being used

≥Change the height of the stands and/or move this unit farther away from the TV. If the TV still does not function correctly, try removing the stands.

If the stands are not used

≥Move this unit farther away from the TV. If the TV still does not function correctly, try using it in a rack or in the wall mount position.

Before use

Getting started

If irregular colouring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move this unit further away from the TV.

Do not use this unit in a metal cabinet.

If the TV’s remote control sensor is blocked by this unit.

Try using the TV’s remote control from a different angle. If the problem persists, you can use the supplied IR Blaster to relay the signal to the TV. (> 18)

Do not use the IR Blaster if the TV’s remote control sensor is not blocked by this unit.

9