Active subwoofer

No power.

Ensure the AC mains lead of the active subwoofer is connected properly.

After turning the subwoofer on, it immediately turns off.

Unplug the AC mains lead and consult your dealer.

No sound from the subwoofer.

≥Check that the active subwoofer is turned on.

≥Check that the wireless link indicator lights green. (> 19)

The wireless link indicator lights red.

≥There is no link between this unit and the active

subwoofer.

jCheck that this unit is turned on.

jEnsure that the digital transmitter is fully inserted into the digital transmitter dock on this unit.

(> 17)

jTurn the active subwoofer off and then back on. Alternatively, turn the active subwoofer off, disconnect the AC mains lead and then reconnect it.

≥Consult your dealer if the problem persists.

The audio from the subwoofer is interrupted.

The active subwoofer is automatically seeking a clear channel. If the interference persists, try moving the other wireless devices to another location outside the range of the active subwoofer or move the active subwoofer nearer to this unit. (> 10)

The wireless link indicator lights red and green alternately.

Turn the subwoofer off, disconnect the AC supply cord and then reconnect it.

Consult your dealer if the problem persists.

Remote control code

When other Panasonic products respond to this unit’s remote control, change the remote control code on this unit and the remote control.

Preparation

≥Turn off all other Panasonic products.

≥Turn on this unit.

Change the remote control to code 2:

1Aim the remote control at this unit’s remote control sensor.

2Press and hold [MUTE] and [BD/DVD] on the remote control for more than 4 sec.

A

 

 

 

 

 

 

 

 

 

 

 

 

BD/DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV

 

 

D

DTS

PCM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Awill blink for 10 sec when the code of this unit is changed.

≥If the unit does not operate after changing the code, repeat steps 1 and 2.

≥To change the remote control to code 1, repeat the steps above, but replace [BD/DVD] with [TV].

Audio information

∫Compatible audio formats

This unit is compatible with the following formats:

Dolby Digital, DTS Digital Surround, 2-channel LPCM and multi-channel LPCM.

Reference

25