Listening operations
12
RQT7369
STOP 7, | CD 6 | |
– DEMO | ||
| ||
CD CHECK |
|
Label must face upward.
|
|
|
| |
|
|
|
| |
|
| Tray | ||
Disc tray | ||||
number | ||||
|
|
1 0
CD
CHANGE
2 | CD 1 | CD 2 | CD 3 | CD 4 | CD |
| CD 5 | ||||
|
|
|
|
| 0 |
|
|
|
|
| CHANGE |
3 | CD 1 | CD 2 | CD 3 | CD 4 | CD 5 |
4 VOLUME
ADOWNUP
CD
CHECK
CD CHECK
CDs
Listening to a CD placed in a specific tray
Preparation:
Press [CD 3/8] and then [STOP 7,
Placing a CD in your desired tray
1
2 (Within about 10 seconds)
Press [CD 1] ~ [CD 5] and insert the CD on the tray.
Press [0 CD CHANGE] again to close.
Repeat steps 1 and 2 to insert up to 5 CDs.
Listening to the CD placed in a specific tray
3 Press [CD 1] ~ [CD 5] to start play.
The player stops after playing the last track.
4 Adjust the volume.
To remove the CD
You can change the CDs in the other trays while one CD is playing1 (except in
2Press [0 CD CHANGE].
Press [CD 1] ~ [CD 5].
Press [0 CD CHANGE] again to close the tray.
ATo check which CDs are in the trays (CD CHECK)
Press [CD CHECK].
The tray with a CD being played will not open.
If the player is stopped, all trays will open.
Press [CD CHECK] again to close the trays.
•Do not remove or insert CDs during a CD check.
•Do not pull out the trays during a CD check.
•8 cm CDs cannot be checked.
Marking a track
You can mark one track each on the 5 discs loaded so that you can start play from them later. (\ page 19)