Panasonic SCPT1050, SCPT950 Using the FM/AM radio, If noise is excessive, Presetting the channel

Using the FM/AM radio

TUNER/BAND

Numbered buttons

, ,

∫ If noise is excessive

When “FM” is selected

Press and hold [—FM MODE] on

D.MIX MONO SLP STCT	DDTS	PL
the main unit to display	SRDE. PRG
“MONO”.	PGMRNDRDS
	EQ W1 W2	WS

Press and hold [—FM MODE] again to cancel the mode.

≥The mode is also canceled when you change the frequency.

When “AM” is selected

Press [FUNCTIONS] on the remote control.

Each time you press the button: BP 2()BP 1

ENTER

FUNCTIONS	Manual tuning
1	Press [TUNER/BAND]§1 to select “FM” or “AM”.

SELECTOR

-TUNE MODE/-FM MODE

2 Press [6, 5]§2 to select the frequency.

≥When performing this step on the main unit, first press

[-TUNE MODE] to select “MANUAL”, and then press [X TUNING W] to select the frequency.

TUNING MEMORY

Radio operations are described mainly with the remote control.

You can alternatively use the corresponding button on the main unit.

§1 [SELECTOR] §2 [X TUNING W] §3 [MEMORY]

Presetting stations automatically

Up to 30 stations can be set in each band, FM and AM.

1	Press [TUNER/BAND]§1 to select “FM” or “AM”.
2	Press and hold [ENTER]§3.
	Release the button when “FM AUTO” or “AM AUTO” is displayed.

≥To start automatic tuning, press and hold [6, 5]§2 until the frequency starts scrolling. Tuning stops when a station is found.

∫ Presetting the channel

Up to 30 stations can be set in each band, FM and AM.

1While listening to the radio broadcast

Press [ENTER]§3.

2While the frequency and “PGM” are flashing on the display

Press the numbered buttons to select a channel.

≥To select a 2-digit number

DISC S.SRD TG KARA D.MIX MONO SLP

e.g. 12:

[S10] ➜ [1] ➜ [2]

Alternatively, press [X, W], and then press [ENTER]§3.

A station previously stored is overwritten when another station is stored in the same channel preset.

Using the FM/AM radio

	The tuner tunes to the lowest frequency and starts to preset all the
				FM frequency step
	stations it can receive into the channels in ascending order.		\Main\unit\only]
	≥“SET OK” is displayed when the stations are set, and the radio
			The step is factory-set to 0.2-MHz, but you can change it to receive
	tunes to the last preset station.
			broadcasts allocated in 0.1-MHz steps.
	≥“ERROR” is displayed when automatic presetting is unsuccessful.
			1 Press [SELECTOR] to select “FM”.
	Preset the channels manually (➜ right).		2 Press and hold [SELECTOR].
			After a few seconds the display changes to show the current minimum
			frequency. Continue to hold the button down. The minimum frequency
	Selecting the preset channels
			changes and the step is changed.
			To return to the original step, repeat steps 1 and 2.
1	Press [TUNER/BAND]§1 to select “FM” or “AM”.
			[Note]
2	Press the numbered buttons to select the channel.		After changing the setting, previously preset frequencies will be cleared.
			Preset them again.
	≥To select a 2-digit number
		SB DISC S.SRD TG KARA D.MIX MONO SLP
	e.g. 12: [S10] ➜ [1] ➜ [2]
		DVD
	Alternatively, press [X, W].	CD
		ODE

≥To perform this step on the main

unit, first press [-TUNE MODE] to select “PRESET”, and then press [X TUNING W] to select the channel.

When a stereo FM broadcast is being

received, “ST” lights in the display.	SLP STCT	DDTS	PL
		SRDE. PRG
		PGMRNDRDS
		EQ W1 W2	WS

RQTX0064

29