Panasonic SCPT1050 Preparing the remote control, Performing QUICK SETUP, Batteries, Use, screen

∫[PT1050] Before using your wireless subwoofer

Perform the pairing procedure below to use your wireless subwoofer.

Preparation

≥Ensure all connections are completed.

≥Turn on the main unit and reduce the volume.

1Turn on your wireless subwoofer.

2While pressing [5/9] on the main unit, press the numbered button [3] on the remote control until “P” lights in the main unit’s display.

3 While “P” is displayed, press [I/D SET].

I/D SET Use a pointed object.

I/D SET

Wireless subwoofer

4While pressing [5/9] on the main unit, press the numbered button [3] on the remote control. ≥“ [WS] ” lights on the main unit’s display.

5Turn the wireless subwoofer off and on again. ≥Make sure its indicator lights up green.

step7 Preparing the remote control

Simple Setup

∫Batteries

Insert so the poles (i and j) match those in the remote control.

Press in and lift up.

R6/LR6, AA

Replace the cover.

≥Do not use rechargeable type batteries.

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥heat or expose to flame.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control.

Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

∫Use

Aim at the remote control signal sensor (➜ page 13), avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.

control / Performing QUICK SETUP

step8 Performing QUICK SETUP

The QUICK SETUP screen assists you to make necessary settings.

the remote

To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).

≥To change your television’s video input mode, refer to its operating instructions.

≥This remote control can perform some basic television operations (➜ page 12).

DVD

, , ,

ENTER

RETURN

AUTO

SETUP

1		Turn on the unit.
2	DVD	Select “DVD/CD”.
3		Show the QUICK SETUP
	SETUP	screen.
		Setup
		QUICK SETUP
		Select the menu language.
		English
		to select and press ENTER	RETURN to return
4	Select	Follow the messages
	RETURN	and make the settings.
		≥Menu Language
		≥TV Type
	Register	≥TV Aspect
5		Press to finish QUICK
	ENTER	SETUP.
6	SETUP	Press to exit.

To change these settings later

Select “QUICK SETUP” in the “Others” menu (➜ page 27).

Preparing

RQTX0064

11