Troubleshooting guide

HDMI or progressive video

Troubleshooting guide

There is ghosting when HDMI or

This problem is caused by the editing method or material used on DVD-Video, but should be

 

progressive output is on.

corrected if you use interlaced output.

 

 

– When using the COMPONENT VIDEO OUT terminal, set “Video Output Mode” in Picture Menu to

23

 

“480i”. (Alternatively, press and hold [CANCEL] to switch to “480i”.)

 

 

– When using the HDMI AV OUT terminal, set “Video Output Mode” in Picture Menu to “480i” output

23,

 

marked with an “¢”. Or, disable the HDMI AV OUT connection and use other video connections.

26

 

Make the settings in the following order:

 

 

1 Set “Video Mode” in the “HDMI” menu to “Off”.

 

 

2 Set “Video Output Mode” in Picture Menu to “480i”. (Alternatively, press and hold [CANCEL] to

 

 

switch to “480i”.)

 

 

 

 

Pictures not in progressive

Select “480p” in “Video Output Mode” in Picture Menu.

23

output.

The unit’s VIDEO OUT terminal outputs the interlaced signal even if “PRG” is displayed.

7

 

 

 

Closed captions not displayed.

When HDMI or progressive output is on, closed captions will not be displayed.

 

 

 

Radio

Distorted sound or noise is heard.

Adjust the position of the FM or AM antenna.

“ST” flickers or does not light.

Use an outdoor antenna.

9

 

 

 

A beat sound is heard.

Turn the television off or move it away from the unit.

 

 

 

A low hum is heard during AM

Separate the antenna from other cables.

broadcasts.

 

 

 

 

 

Wireless equipment

No sound.

Ensure that the digital transmitter is fully inserted into the slot of the main unit.

9

 

Ensure that the wireless equipment is plugged into the AC outlet and is turned on. Then, check that

10, 13

 

[W1] [and [WS] ([PT1050])] is displayed on the main unit’s display.

 

 

 

 

The indicator on the wireless

There is a power supply problem. Consult the dealer.

equipment keeps flashing

 

 

between red and green.

 

 

 

 

 

Television displays

/

The operation is prohibited by the unit or disc.

 

 

 

“Cannot display group xx, content xx”

You are trying to display incompatible contents.

 

 

 

“This disc may not be played in

Only DVD-Video discs that include or have the same region number as the one on the rear panel of this

Cover

your region”

unit can be played.

page

 

 

 

No on-screen display.

Select “On” in “On-Screen Messages” in the “Display” menu.

26

 

 

 

Main unit’s screen saver remains

When using the HDMI connection, audio/video information is continually transferred between the

 

main unit and the television regardless of which source has been selected on the main unit. This is

 

 

normal.

 

 

 

 

RQTX0064

38

Page 38
Image 38
Panasonic SCPT1050, SCPT950, SC-PT953 Hdmi or progressive video, Radio, Wireless equipment, Television displays