Panasonic SDR-H20GN, SDR-H250GN Beeps for 4 times, Lights, Flashes continuously

LSQT1214_GN.book 88 ページ ２００７年２月８日 木曜日 午後８時５０分

Others

≥In the following cases, the unit may not turn off even when you set this to [5 MINUTES]. jWhen using the AC adaptor

jWhen connecting the unit to a computer or printer via the USB cable

∫[BEEP SOUND]

≥ [OFF]≥ [ON]

This allows operations such as starting and ending recording to be signaled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended.

1 Beep

When you start recording When you turn on the power

When this unit is recognised by the computer or the printer, etc.

2 Beeps

When you pause recording

When you turn off the power

2 Beeps for 4 times

When an error occurs e.g. recording not starting. Check the sentence displayed on the screen. (l 91)

∫[INITIAL SET]

≥ [YES]≥ [NO]

When there is a menu that cannot be selected due another function or mode being activated, set to [YES] for changing the menu settings back to the initial shipping condition.

(The language setting cannot be changed back to the initial shipping condition.)

∫[ILLUMINATION]

≥ [OFF]≥ [ON]

This allows operations to be signaled by the lighting of the illumination LED on the top of the unit.

1 Flash

When you turn on the power

(When in a recording mode: in orange)

(When in a playback mode: in blue)

2 Flashes

When you switch the mode to a recording mode (in orange)

When you switch the mode to a playback mode (in blue)

Lights

During motion picture recording (in orange) During playback and while connected to a computer, a printer, etc. (in blue)

Flashes continuously

While formatting, copying, deleting, etc. (in orange)

∫[DEMO MODE]

≥ [OFF]≥ [ON]

This item is used to start the unit demonstration. (Only when using the AC adaptor and the mode

dial is at the or position)

If you set this to [ON] without inserting an SD card, this unit is automatically set to the demonstration mode for introducing its functions. If any button is pressed or operated, the demonstration mode is cancelled. If no operations take place for approx. 10 minutes, the demonstration mode automatically starts. To terminate the demonstration mode, insert an SD card, or set this to [OFF]. For normal use, set this function to [OFF].

88

LSQT1214