LSQT1214_GN.book 22 ページ 2007年2月8日 木曜日 午後8時50分

Setup

To turn on the power Open the LCD monitor.

The status indicator lights and the power turns on.

To turn off the power Close the LCD monitor.

The status indicator goes off and the power turns off.

The power will not turn off while recording even if the LCD monitor is closed.

Set the OFF/ON switch to OFF when the unit is not being used.

Inserting/removing an SD card

Before inserting/removing an SD card, be sure to set the OFF/ON switch to OFF.

If the SD card is inserted or removed while the OFF/ON switch is set to ON, this unit may malfunction or the data recorded on the SD card may be lost.

1 Set the OFF/ON switch to OFF to turn off the power.

Check that the status indicator has gone off.

2 Open the LCD monitor and then slide the card slot open lever A to open the card slot cover.

A

3 Insert/remove the SD card into/ from the card slot.

B

When inserting an SD card, face the label side B upwards and press it straight in as far as it goes.

When removing the SD card, press the centre of the SD card and then pull it straight out.

22

LSQT1214

Page 22
Image 22
Panasonic SDR-H20GN, SDR-H250GN Inserting/removing an SD card, To turn on the power Open the LCD monitor