EverFocus 810M, EDR810H, 410M, 410H instruction manual Power Disconnect

Models: 810M 410M EDR810H 410H

1 84
Download 84 pages 7.08 Kb
Page 6
Image 6

Safety Precautions

Safety Precautions

The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence

of uninsulated ” dangerous voltage ” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance(servicing)instructions in the literature accompanying the appliance.

Warning :

To prevent fire or shock hazard, do not expose units not specifically designed for outdoor use to rain or moisture.

Attention:

Installation should be performed by qualified service personnel only

in accordance with the National Electrical Code or applicable local codes.

Power Disconnect:

Units with or without ON -OFF switches have power supplied to the unit whenever the power code is inserted into the power source; however, the unit is operational only when the ON-OFF switch is in the ON position.

The power cord is the main power disconnect for all units.

External Power Supplies

Use only the recommended power supplies.

Power supplies must comply with the requirement of

the latest version of IEC 60065/CNS 13439. Substitutions may damage the unit or cause a fire or shock hazard.

AC100~240V Power Cords

AC100~240V power cords

Warning:

Electrostatic-sensitive device. Use proper CMOS/MOSFET handing precautions to avoid electrostatic discharge.

Do not place on uneven or unstable work surfaces. Seek servicing if the casing.

4

Page 6
Image 6
EverFocus 810M, EDR810H, 410M, 410H instruction manual Power Disconnect