1.5 MONITOR DISPLAY
The status information of the cameras or machine will show up, and be located at different places on the screen.
1
2
1. Channel tag
2. Event sign
3. Select sign
2. Event sign
4. Play status bar
5. Record status bar
Channel tag: A channel tag indicates the channel name of the screen.
Event sign: Event signals which are small icons with a capital letter and red background show the events on each screen. There are 4 different signals which are
A: Alarm event. The alarm place where the camera locates. In order to show the camera video to a corresponding alarm, setting a FOCUS CAMERA in ALARM SETUP MENU is necessary.
M: Motion event. Motion event only shows up when the camera ’s MOTION is enabled in MOTION SETUP MENU, and the camera detects a motion.
V: Video loss event. Video loss event only shows when the camera ’s VLOSS is enabled in VLOSS SETUP MENU, and the camera signal is lost.
S: Sequence sign. Sequence sign shows up when the display is in the sequence mode. The sequence display is located on display with a “ ” sign in 4, 7, Full screen and PIP
(picture in picture) display mode. The S sign will replace “ ” sign in the
display when sequence occurs.
17
