LSQT1214_GN.book 38 ページ 2007年2月8日 木曜日 午後8時50分

Recording

A Focus indication

± (The white lamp flashes.):

Focusing

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¥ (The green lamp lights up.):

When in focus

B

 

 

 

 

 

 

 

 

 

 

No mark:

When focusing is unsuccessful.

 

 

 

 

 

 

The focus indication is indicated as follows when the Photoshot

button [] is not pressed halfway. Please use it as a guide for recording.

¥(The green lamp lights up.): When in focus and a good picture can be recorded.

± (The white lamp lights up.): Almost in focus

BFocus area

6 Press the Photoshot button [] fully to take the picture.

SDR-H20

5 Press the Photoshot button [].

The unit automatically focuses on the subject at the centre of screen (when auto focus is selected).

For information about the number of recordable still pictures (l 109)

The sound cannot be recorded.

If the write protection switch on the SD card is set to LOCK, it cannot be used for recording. (l 15)

The Photoshot button [] on the remote control cannot be pressed halfway. (SDR-H250)

If the [PICT. QUALITY] is set to [ ], mosaic-pattern noise may appear on a playback image depending on the picture content.

Other products may degrade or not play back still pictures recorded with this unit.

To record still pictures clearly

When zooming in on the subject with a magnification of 4k or higher, it is difficult to reduce the slight shaking from holding this unit by hand. We recommend decreasing the zoom magnification and approaching the subject when recording.

When recording still pictures, hold the unit firmly with your hands and keep your arms stationary at your side so as not to shake the unit.

You can record stable pictures without shaking by using a tripod and the remote control.

38

LSQT1214

Page 38
Image 38
Panasonic SDR-H20GN Press the Photoshot button fully to take the picture SDR-H20, To record still pictures clearly