Panasonic SDR-H250EB Inserting/removing an SD card, To turn on the power Open the LCD monitor

LSQT1211(PAL_ENG).book 24 ページ ２００７年２月１３日 火曜日 午後１時１４分

Setup

∫To turn on the power Open the LCD monitor.

The status indicator lights and the power turns on.

∫To turn off the power Close the LCD monitor.

The status indicator goes off and the power turns off.

≥The power will not turn off while recording even if the LCD monitor is closed.

Set the OFF/ON switch to OFF when the unit is not being used.

Inserting/removing an SD card

Before inserting/removing an SD card, be sure to set the OFF/ON switch to OFF.

If the SD card is inserted or removed while the OFF/ON switch is set to ON, this unit may malfunction or the data recorded on the SD card may be lost.

1 Set the OFF/ON switch to OFF to turn off the power.

≥Check that the status indicator has gone off.

2 Open the LCD monitor and then slide the card slot open lever A to open the card slot cover.

A

3 Insert/remove the SD card into/ from the card slot.

B

≥When inserting an SD card, face the label side B upwards and press it straight in as far as it goes.

≥When removing the SD card, press the centre of the SD card and then pull it straight out.

24

LSQT1211