Panasonic SDR-H250EB Dpof setting, Select the file to be protected, then press the joystick

LSQT1211(PAL_ENG).book 68 ページ ２００７年２月１３日 火曜日 午後１時１４分

Editing

1 Press the MENU button, then select [PHOTO SETUP] # [LOCK SET] # [YES] and press the joystick.

MENU

2 Select the file to be protected, then press the joystick.

[ ] display appears and the selected file is locked.

≥Press the joystick again to release the lock setting.

≥You can also select multiple files in succession.

To complete the settings

Press the MENU button.

DPOF setting

This is for writing the printing data on an SD card.

[SD]

You can write the data of the still pictures to be printed and the number of prints (DPOF data) onto the SD card.

¬Rotate the mode dial to select .

¬Select [SD CARD] in [MEDIA SELECT].

1 Press the MENU button, then select [PHOTO SETUP] #

[DPOF SET] # [SET] and press the joystick.

MENU

2 Select the file to be set, then press the joystick.

The number of prints set to be in DPOF is displayed.

3 Move the joystick up or down to select the number of prints, then press the joystick.

≥You can select from 0 to 999. (The selected number of pictures can be printed with the printer supporting DPOF.)

≥To cancel the setting, set the number of prints to [0].

≥You can also select multiple files in succession.

To complete the settings

Press the MENU button.

To cancel all DPOF settings

Press the MENU button, then select [PHOTO SETUP] # [DPOF SET] # [CANCEL ALL] and press the joystick.

≥When the confirmation message appears, select [YES], then press the joystick.

∫What is DPOF?

DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF.

68

LSQT1211