LSQT1211(PAL_ENG).book 32 ページ 2007年2月13日 火曜日 午後1時14分

Setup

Display style

Screen display

[Y/M/D]

2007.12.15

 

 

[M/D/Y]

12.15.2007

 

 

[D/M/Y]

15.12.2007

 

 

 

 

The date and time function are driven by a built-in lithium battery.

Make sure to check the time before recording.

If the time display becomes [- -], the built-in lithium battery has run down. Use the following steps to charge the battery. When you turn on the power for the first time after charging, a message asking you to set the date and time will appear. Select [YES] and set the date and time.

To recharge the built-in lithium battery Connect the AC adaptor or attach the battery to the unit, and the built-in lithium battery will be recharged. Leave the unit as it is for approx. 24 hours and the battery will save the date and time for approx. 6 months. (Even if the OFF/ ON switch is set to OFF, the battery is still being recharged.)

WARNING

THE LITHIUM BATTERY IN THIS EQUIPMENT MUST ONLY BE REPLACED BY QUALIFIED PERSONNEL. WHEN NECESSARY, CONTACT YOUR LOCAL PANASONIC SUPPLIER.

Adjusting the LCD monitor

Adjusting the brightness and colour level

1 Press the MENU button, then select [SETUP] # [LCD SET] #

[YES] and press the joystick.

MENU

2 Move the joystick up or down to select the item to be adjusted. Then, move the joystick left or right to make the adjustment.

The bar display moves.

[BRIGHTNESS]:

Brightness of the LCD monitor

[COLOUR]:

Colour level of the LCD monitor

When the LCD monitor is rotated by 180° towards the lens, the brightness and colour level of the LCD monitor cannot be adjusted.

These settings will not affect the images actually recorded.

32

LSQT1211

Page 32
Image 32
Panasonic SDR-H250EB operating instructions Adjusting the LCD monitor, Setup Display style Screen display