LSQT1211(PAL_ENG).book 85 ページ 2007年2月13日 火曜日 午後1時14分

With a computer

3 Connect this unit and a computer.

A

AUSB cable (supplied)

Insert the plugs as far as they will go. The unit and computer will not operate properly if the plugs are not inserted fully.

Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

The DVD COPY preparation screen appears.

4 Insert a DVD disc into the DVD drive.

It is recommended that you use a brand-new DVD disc.

Data writing on the disc starts.

When writing to the disc is finished, the disc will be ejected from the drive.

Depending on the amount of data, writing to the disc may take time.

Do not subject the unit to vibration while data is being written. Otherwise, the writing process may be aborted.

If all of the data cannot be written onto one DVD disc, it will be written onto a second (or third, etc.) disc. When the writing on the first disc is completed, a message will appear so insert another disc of the same type as the first.

Still pictures are converted to motion pictures and written onto the DVD disc.

Check on the DVD player or other player device whether the DVD-Video disc you have created can be played properly.

If the disc cannot be played properly, create the DVD-Video disc by following the steps in “Creating DVD-Video discs with the selected images”. (l 87)

The images cannot be stored in the computer.

The images recorded on the DVD-Video disc you have created cannot be edited by the computer. To edit them, import the images to the computer.

When playing a DVD-Video disc you have created, there will be a pause of several seconds between scenes.

The images recorded on SD cards cannot be copied onto discs using the DVD COPY function. Import the images to your computer and then write them on the DVD disc. (l 87)

The image saving history is stored for each computer user account. For this reason, even if images have already been copied onto a DVD disc, they will be copied onto the DVD disc again when a different user account is used.

You cannot use a Panasonic DVD Video Camera as a device for writing.

Playing back and importing images

¬Connect this unit to the AC adaptor and turn on the unit.

85

LSQT1211

Page 85
Image 85
Panasonic SDR-H250EB operating instructions Playing back and importing images, Insert a DVD disc into the DVD drive