LSQT1211(PAL_ENG).book 102 ページ 2007年2月13日 火曜日 午後1時14分

Others

Problem

Check points

 

Is this unit connected to a computer?

The indication

# No operation can be performed on this unit when it is connected

to a computer.

disappears.

Turn off the power to this unit. If the power cannot be turned

 

The screen is frozen.

off, remove the SD card then press the RESET button, or

No operation can be

remove the battery or AC adaptor and then reattach it. After

that, turn on the power again. If normal operation is still not

performed.

restored, detach the power connected, and consult the dealer

 

 

who you purchased this unit from.

 

 

 

 

 

 

The unit has automatically detected an error. Remove the SD

 

card then press the RESET button to restart the unit.

 

# (SDR-H250) Press the RESET button with the projecting part of

 

the grip belt A.

 

A

 

 

 

 

 

 

 

 

 

 

 

# (SDR-H20) Press the RESET button with the projecting part of

“PUSH THE RESET

the lens cap B.

 

SWITCH.” is displayed.

B

 

 

If you do not press the RESET button, the power to this unit is

 

turned off automatically about 1 minute later.

 

Even after you press the RESET button, the indication may still

 

appear repeatedly. If so, this unit needs repair. Detach the

 

power connected, and consult the dealer who you purchased

 

this unit from. Do not attempt to repair the appliance by

 

yourself.

 

 

If the SD card is inserted

Is the SD card formatted on a computer inserted?

in this unit, it is not

# Use this unit to format SD cards. Please be aware that if an SD

card is formatted, then all the data recorded on the card will be

recognised.

erased. (l 70)

 

 

 

If the SD card is inserted

Check that the device is compatible with the capacity or type of

in another device, it is not

SD card (SD Memory Card/SDHC Memory Card) that you

inserted.

recognised.

# Refer to the operating instructions of the device for details.

 

102

LSQT1211

Page 102
Image 102
Panasonic SDR-H250EB operating instructions 102