Panasonic SDR-S7P/PC operating instructions Printing pictures from, PictBridge printers

With other	3	Printing pictures from
products		PictBridge printers

Connect the unit and AC adaptor (P.20), and set the mode dial to a setting other than [OFF].

Connect the unit and printer with the USB cable (supplied).

Insert the plugs as far as they will go.

Select [PictBridge].

Select the still pictures to print.

Set the number of copies.

• To not print the picture, set “0”.

• Repeat steps and to select up to 8 still pictures for printing.

Number of copies (Max. 9)

●Do not use any other USB connection cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

●Connect the unit directly to the printer without going through a USB hub. ●For paper size and print quality, etc., check printer settings.

●Avoid the following operations during printing. Otherwise, pictures will not print correctly:

•Disconnecting the USB cable

•Opening the card/battery door

•Rotating the mode dial

•Shutting off power

62 VQT1R00