Panasonic SDR-S7P/PC operating instructions Installing MotionSD, Studio

With a	4	Installing MotionSD
computer		STUDIO

●Before installing the software, check your operating environment (P.72) and

close any other software applications which are running.

●Do not perform other computer operations while installing the software. ●Do not connect this unit to the computer until installation is complete.

●Install MotionSD STUDIO only from the supplied CD-ROM.

Insert the supplied CD-ROM into your computer. The Setup Menu starts automatically.

Click [MotionSD STUDIO 1.3E].

If installation is stopped halfway through, the software may not run properly.

Click [Next].

Continue to follow the on-screen messages to install it.

•Depending on the operating environment, you may be required to install DirectX.

If so, click [Yes] and install it.

Select a video system and click [Next]. [Readme.txt] is displayed when installation is complete. Be sure to check the contents.

Click [Finish].

Selecting “Yes, I want to restart my computer now.” automatically restarts the computer and completes installation.

Eject the CD-ROM from the computer.

After the installation is finished, the icon [ ] is displayed in the task tray. When this unit and the computer are connected with the USB cable, the [SD Browser auto start] dialog box appears. (P.76)

After installation is complete, clicking on [MotionSD STUDIO 1.3E] in the Setup menu starts up the Uninstaller. Click [EXIT] in the Setup menu to close the menu.

74 VQT1R00