Operation icons can be used to set effects, compensate brightness or perform other operations in one easy step.

indicates functions used with motion pictures and functions used with still pictures.

●It is not possible to set the PRE-REC function when less than one minute is left for recording pictures.

●When recording has been started within 3 seconds after the PRE-REC function was set, the scenes starting from the moment when this function was set will be recorded.

●The camera shake which occurs when the record button is pressed or the sound of the button being operated may be recorded.

●It is not possible to add any fade effects (P.39).

Self-portrait recording function

If you turn the LCD monitor toward the lens side, you can record pictures of yourself as you look at the LCD monitor.

Set the mode dial to [] or [].

Turn the LCD monitor toward you (toward the lens side).

●The picture you will see displayed on the LCD monitor is an image of yourself with the left and right sides reversed just like

when you look at your reflection in a mirror. (The image which is recorded is the normal image of yourself.)

●Only part of the screen display appears. When [] is displayed, turn the LCD monitor back in the direction of normal recording, and check what the message says.

Start recording.

●No operation icons are displayed during self-portrait recording even when the cursor buttons are pressed.

VQT1R00 43

Page 43
Image 43
Panasonic SDR-S7P/PC operating instructions Self-portrait recording function